The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Constructed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC40 Condenser: A sturdy, energy-efficient air conditioner that keeps your home cool during summer while lowering energy costs. A952V Furnace: Two-stage heating with 95% AFUE efficiency and a variable-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Optimizes heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3 Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5AC4036 Condenser Stages Single Furnace Model A952V060BU4SBA Furnace Stages Two Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB004 Coil Cabinet Size B AHRI 215559802 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and thermal at an affordable price. Manufactured by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC50 Condenser: An energy-productive air conditioning unit that keeps your home cool during summer while minimizing energy costs. A952V Furnace: Two-stage heating with 95% AFUE efficiency and a variable-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line deployment Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and offer a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5036 Condenser Stages Single Furnace Model A952V060BU4SBA Furnace Stages Two Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB004 Coil Cabinet Size B AHRI 215480369 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, fuel-efficient solution for year-round comfort. Designed for residential use, it combines productive cooling and heating at an affordable price. Manufactured by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC40 Condenser: A durable, energy-efficient air conditioner that keeps your home cool while minimizing energy costs. A952V Furnace: Two-stage heating with 95% AFUE efficiency and a variable-speed blower for optimal warmth and air circulation. 5TXC Coil: Optimizes heat transfer for heating and cooling with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5 Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Condenser Model A5AC4042 Condenser Stages Single Furnace Model A952V060BU4SBA Furnace Stages Two Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 215559944 Refrigerant R-454B Warranty 10 Year Components, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the reliable Trane family, RunTru products deliver quality, durability, and performance to uphold indoor comfort all year. What's Included: A5AC50 Condenser: A durable, energy-efficient air conditioner that keeps your home cool during summer while minimizing power costs. A951X Furnace: Delivers consistent heating with 95% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard mounting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5036 Condenser Stages Single Furnace Model A951X060BU4SAC Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB004 Coil Cabinet Size B AHRI 215480345 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver premium, durability, and performance to sustain indoor comfort all year. What's Included: A5AC40 Condenser: A durable, energy-efficient air conditioner that keeps your home cool while minimizing energy costs. A951X Furnace: Provides consistent heating with 95% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will evaluate on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5 Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5AC4042 Condenser Stages Single Furnace Model A951X060BU4SAC Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 215559948 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC40 Condenser: A long-lasting, energy-efficient air conditioner that keeps your home cool while minimizing energy costs. A951X Furnace: Provides consistent heating with 95% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will examine on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4 Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Condenser Model A5AC4048 Condenser Stages Single Furnace Model A951X080CU5SAC Furnace Stages Single Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 215560084 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Crafted for residential use, it combines productive cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and operation to maintain indoor convenience throughout the year. What's Included: A5AC40 Condenser: A durable, energy-efficient air conditioner that keeps your home cool during summer while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and improved air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our mounting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5AC4060 Condenser Stages Single Furnace Model A801X080CM5SDB Furnace Stages Single Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215560184 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort throughout the year. What's Included: A5AC40 Condenser: A durable, energy-efficient air conditioner that keeps your dwelling cool during summer while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard setup scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4 Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Condenser Model A5AC4048 Condenser Stages Single Furnace Model A801X080CM5SDB Furnace Stages Single Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 215560070 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a dependable, energy-efficient solution for year-round comfort. Designed for residential use, it combines streamlined cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver excellent, durability, and performance to maintain indoor comfort throughout the year. What's Included: A5AC40 Condenser: A durable, energy-productive air conditioner that keeps your home cool during summer while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling, with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5 Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5AC4042 Condenser Stages Single Furnace Model A801X060BM4SDA Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 215559954 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-optimized solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Manufactured by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort throughout the year. What's Included: A5AC50 Condenser: A durable, energy-efficient air conditioner that keeps your home cool during summer while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and improved air circulation in colder seasons. 5TXC Coil: Enhances heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5018 Condenser Stages Single Furnace Model A801X040BM2SDA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215479462 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-productive solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and operation to keep your home comfortable all year. What's Included: A5AC40 Condenser: A durable, energy-efficient air conditioner that keeps your property cool during summer while lowering energy costs. A951X Furnace: Provides consistent temperature with 95% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder months. 5TXC Coil: Optimizes heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing added is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5AC4060 Condenser Stages Single Furnace Model A951X080CU5SAC Furnace Stages Single Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215560182 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC50 Condenser: A durable, energy-efficient air conditioner that keeps your home cool during summer while lowering energy costs. A952V Furnace: Two-stage heating with 95% AFUE efficiency and a variable-speed blower for optimal warmth and improved air circulation in colder seasons. 5TXC Coil: Enhances heat transfer for warming and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard deployment scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5 Bundle Cooling Efficiency (SEER2) 15 SEER2 Condenser Model A5AC5030 Condenser Stages Single Furnace Model A952V040BU3SBA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 215480101 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC unit offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC50 Condenser: A durable, energy-efficient air conditioner that keeps your home cool while lowering energy costs. A951X Furnace: Provides consistent heating with 95% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling, with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5030 Condenser Stages Single Furnace Model A951X040BU3SAC Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 215480107 Refrigerant R-454B Warranty 10 Year Pieces, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-productive solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to keep your home comfortable all year. What's Included: A5AC40 Condenser: A durable, energy-efficient air conditioner that keeps your home cool while minimizing energy costs. A952V Furnace: Two-stage heating with 95% AFUE efficiency and a variable-speed blower for optimal warmth and air circulation in colder months. 5TXC Coil: Optimizes heat transfer for warming and cooling, with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our mounting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4 Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Condenser Model A5AC4048 Condenser Stages Single Furnace Model A952V080CU5SBA Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 215560080 Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Constructed for residential use, it combines efficient cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products provide quality, durability, and efficiency to maintain indoor ease all year. What's Included: A5AC50 Condenser: A durable, energy-efficient air conditioner that keeps your home cool while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation. 5TXC Coil: Optimizes heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5036 Condenser Stages Single Furnace Model A801X060BM4SDA Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB004 Coil Cabinet Size B AHRI 215480355 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC50 Condenser: A resilient, energy-efficient air conditioner that keeps your home cool during summer while lowering energy costs. A952V Furnace: Provides two-stage heating with 95% AFUE efficiency and a variable-speed blower for optimal warmth and improved air circulation in colder seasons. 5TXC Coil: Optimizes heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full setup start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5018 Condenser Stages Single Furnace Model A952V040BU3SBA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215479458 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS   We supply high

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-optimized solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Manufactured by the trusted Trane family, RunTru products deliver quality, durability, and performance to preserve indoor comfort all year. What's Included: A5AC50 Condenser: Resilient, energy-efficient air conditioning that keeps your home cool while minimizing energy costs. A951X Furnace: Provides consistent heating with 95% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation. 5TXC Coil: Optimizes heat transfer in heating and cooling with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (regular composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5018 Condenser Stages Single Furnace Model A951X040BU3SAC Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215479468 Refrigerant R-454B Warranty 10 Year Components, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver high-grade, durability, and performance to maintain indoor convenience all year. What's Included: A5AC50 Condenser: A durable, energy-productive air conditioner that keeps your house cool while minimizing energy costs. A801X Furnace: Delivers consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5030 Condenser Stages Single Furnace Model A801X060BM4SDA Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215480009 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a stable, energy-efficient solution for year-round ease. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC50 Condenser: Resilient, energy-efficient air conditioning that keeps your home cool while lowering energy costs. A952V Furnace: Two-stage heating with 95% AFUE efficiency and a variable-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC setup by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after fitting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5024 Condenser Stages Single Furnace Model A952V040BU3SBA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215479666 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

Experience efficient and reliable comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. This unit includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable comfort in extreme temperatures. S8X1 Gas Furnace: Provides powerful, consistent heating with a single-stage gas valve, focusing on efficiency and long-term reliability. 5TXC Coil: Enhances heat transfer for thermal and cooling with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will review on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Pieces replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4018 Condenser Stages Single Furnace Model S8X1B040M2PSCA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215557580 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY  

Read more less

  The RunTru all-electric HVAC system offered by Cedar Park Heat and Air, including the heat pump condenser, air handler, and heat kits, provides power-efficient, dependable comfort for residential use. Designed by the trusted Trane family, it combines advanced performance and affordability for year-round indoor climate control. With heating, cooling, and supplemental electric heat, it s an ideal all-electric solution for home comfort. What's Included: A5HP50 Heat Pump Condenser: Delivers efficient heating and cooling with reliable heat transfer in varying weather. Built durable to withstand harsh conditions. A5AHV Air Handler: Features a variable-speed blower for improved airflow, stable temperature, and quiet operation. Designed for energy efficiency and easy installation. BAYHTR Heat Kits: Provides electric heat backup for extra warmth during cold months, ensuring dependable operation in low temperatures. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 15 Seer 2 Heat Pump Condenser Model A5HP5060 Heat Pump Condenser Stages Variable Air Handler Model A5AHV007A1D30A Air Handler Stages Single Air Handler Capacity (BTU) 42k-60k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1517BRKA Heat Kit Output 17KW AHRI 214296796 Refrigerant R-454B Warranty 10 Year Pieces, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY   PRODUCT SPECS PRODUCT MANUAL  

Read more less

The RunTru all-electric HVAC system offered by Cedar Park Heat and Air, featuring the heat pump condenser, air handler, and heat kits, delivers energy-efficient, reliable comfort for residential use. Designed by the trusted Trane family, this setup combines advanced performance and affordability to maintain year-round indoor climate control. With heating, cooling, and supplemental electric heat, it s an ideal solution for homes seeking all-electric efficiency and comfort. What's Included: A5HP40 Heat Pump Condenser: Provides efficient heating and cooling, ensuring year-round comfort with reliable heat transfer in varying weather. Built with durable construction to withstand harsh elements. A5AHV Air Handler: Equipped with a variable-speed blower, it delivers enhanced airflow, consistent temperature control, and quiet operation. Designed for energy efficiency and easy installation. BAYHTR Heat Kits: Offers electric heat backup for extra warmth during colder months, ensuring dependable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included components Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and conventional installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (typical composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after deployment If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Heat Pump Condenser Model A5HP4024 Heat Pump Condenser Stages Variable Air Handler Model A5AHV003A1B30A Air Handler Stages Single Air Handler Capacity (BTU) 18k-30k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1508BRK* Heat Kit Output 8KW AHRI 215611004 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL

Read more less

The RunTru all-electric HVAC system offered by Cedar Park Heat and Air, featuring the heat pump condenser, air handler, and heat kits, delivers energy-efficient, reliable comfort for residential use. Designed by the trusted Trane family, this configuration combines advanced functionality and affordability to maintain year-round indoor climate control. With heating, cooling, and supplemental electric heat, it s ideal for homes seeking all-electric efficiency and comfort. What's Included: A5HP40 Heat Pump Condenser: Provides efficient heating and cooling, ensuring year-round comfort with reliable heat transfer in varying weather. Built with durable construction to withstand harsh elements. A5AHC Air Handler: Equipped with a multi-speed blower, it delivers enhanced airflow, consistent temperature control, and quiet operation. Designed for energy efficiency and easy installation. BAYHTR Heat Kits: Provides electric heat backup for extra warmth during colder months, ensuring dependable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Setup Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our deployment causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 -Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heat Pump Condenser Model A5HP4024 Heat Pump Condenser Stages Single Air Handler Model A5AHC003A1B30A Air Handler Stages Single Air Handler Capacity (BTU) 18k-30k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1508BRK* Heat Kit Output 8KW AHRI 215611000 Refrigerant R-454B Warranty 10 Year Pieces, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

The RunTru gas HVAC system offered by Cedar Park Heat and Air is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC50 Condenser: A durable, energy-efficient air conditioner that keeps your home cool while minimizing energy costs. A951X Furnace: Provides consistent heating with 95% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Optimizes heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing further is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5024 Condenser Stages Single Furnace Model A951X040BU3SAC Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB004 Coil Cabinet Size B AHRI 215479702 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY  

Read more less