Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-060 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK48MVT-060 Air Handler: Engineered for reliable performance and efficient airflow, featuring a variable-speed ECM blower motor, multi-positional cabinet, and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB48-20CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 15.5 Heating Efficiency (HSPF2) 7.8 Condenser Model ML16KP2-060 Condenser Stages Two Air Handler Model CBK48MVT-060 Air Handler Stages Variable-Speed - Multi-Positional Air Handler Capacity 060K Heat Source Electric Heat Kit Model ECB48-20CB AHRI Number 218630629 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-036 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK48MVT-036 Air Handler: Engineered for reliable performance and efficient airflow, featuring a variable-speed ECM blower motor, multi-positional cabinet, and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB48-9CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17 Heating Efficiency (HSPF2) 8 Condenser Model ML16KP2-036 Condenser Stages Two Air Handler Model CBK48MVT-036 Air Handler Stages Variable-Speed - Multi-Positional Air Handler Capacity 036K Heat Source Electric Heat Kit Model ECB48-9CB AHRI Number 218457593 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-024 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK48MVT-018/024 Air Handler: Engineered for reliable performance and efficient airflow, featuring a variable-speed ECM blower motor, multi-positional cabinet, and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB48-9CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17 Heating Efficiency (HSPF2) 8.1 Condenser Model ML16KP2-024 Condenser Stages Two Air Handler Model CBK48MVT-018/024 Air Handler Stages Variable-Speed - Multi-Positional Air Handler Capacity 018K/024K Heat Source Electric Heat Kit Model ECB48-9CB AHRI Number 218457522 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-048 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK47UHET-048 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB47-15CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 16 Heating Efficiency (HSPF2) 8.2 Condenser Model ML16KP2-048 Condenser Stages Two Air Handler Model CBK47UHET-048 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 048K Heat Source Electric Heat Kit Model ECB47-15CB AHRI Number 218457520 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-060 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK47UHET-060 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB47-20CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 15.8 Heating Efficiency (HSPF2) 7.8 Condenser Model ML16KP2-060 Condenser Stages Two Air Handler Model CBK47UHET-060 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 060K Heat Source Electric Heat Kit Model ECB47-20CB AHRI Number 218457521 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-036 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK47UHET-042 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB47-9CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17 Heating Efficiency (HSPF2) 8 Condenser Model ML16KP2-036 Condenser Stages Two Air Handler Model CBK47UHET-042 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 042K Heat Source Electric Heat Kit Model ECB47-9CB AHRI Number 218457595 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-048 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK48MVT-048 Air Handler: Engineered for reliable performance and efficient airflow, featuring a variable-speed ECM blower motor, multi-positional cabinet, and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB48-15CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17 Heating Efficiency (HSPF2) 8.1 Condenser Model ML16KP2-048 Condenser Stages Two Air Handler Model CBK48MVT-048 Air Handler Stages Variable-Speed - Multi-Positional Air Handler Capacity 048K Heat Source Electric Heat Kit Model ECB48-15CB AHRI Number 218457676 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-060 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHVT-060 Air Handler: Engineered for reliable performance and efficient airflow, featuring a variable-speed ECM blower motor for enhanced comfort control and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-20CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.7 Heating Efficiency (HSPF2) 7.8 Condenser Model ML16KP2-060 Condenser Stages Two Air Handler Model CBK45UHVT-060 Air Handler Stages Variable-Speed - Upflow/Horizontal Air Handler Capacity 060K Heat Source Electric Heat Kit Model ECB45-20CB AHRI Number 218630632 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-048 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHVT-060 Air Handler: Engineered for reliable performance and efficient airflow, featuring a variable-speed ECM blower motor for enhanced comfort control and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-15CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 15.5 Heating Efficiency (HSPF2) 8.2 Condenser Model ML16KP2-048 Condenser Stages Two Air Handler Model CBK45UHVT-060 Air Handler Stages Variable-Speed - Upflow/Horizontal Air Handler Capacity 060K Heat Source Electric Heat Kit Model ECB45-15CB AHRI Number 218457674 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-024 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK47UHET-024 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB47-9CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 16.5 Heating Efficiency (HSPF2) 8 Condenser Model ML16KP2-024 Condenser Stages Two Air Handler Model CBK47UHET-024 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 024K Heat Source Electric Heat Kit Model ECB47-9CB AHRI Number 218457518 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-048 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHET-048 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-15CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 16 Heating Efficiency (HSPF2) 8 Condenser Model ML16KP2-048 Condenser Stages Two Air Handler Model CBK45UHET-048 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 048K Heat Source Electric Heat Kit Model ECB45-15CB AHRI Number 218457677 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-036 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHET-036 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-10CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17 Heating Efficiency (HSPF2) 7.8 Condenser Model ML16KP2-036 Condenser Stages Two Air Handler Model CBK45UHET-036 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 036K Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 218457597 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-024 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHET-024 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-10CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.5 Heating Efficiency (HSPF2) 7.5 Condenser Model ML16KP2-024 Condenser Stages Two Air Handler Model CBK45UHET-024 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 024K Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 218472458 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-024 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHVT-024 Air Handler: Engineered for reliable performance and efficient airflow, featuring a variable-speed ECM blower motor for enhanced comfort control and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-10CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17 Heating Efficiency (HSPF2) 7.5 Condenser Model ML16KP2-024 Condenser Stages Two Air Handler Model CBK45UHVT-024 Air Handler Stages Variable-Speed - Upflow/Horizontal Air Handler Capacity 024K Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 218472457 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-060 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHET-060 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-20CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.5 Heating Efficiency (HSPF2) 7.8 Condenser Model ML16KP2-060 Condenser Stages Two Air Handler Model CBK45UHET-060 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 060K Heat Source Electric Heat Kit Model ECB45-20CB AHRI Number 218630631 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-060 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK43UHET-060 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-20CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.7 Heating Efficiency (HSPF2) 7.5 Condenser Model ML16KP2-060 Condenser Stages Two Air Handler Model CBK43UHET-060 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 060K Heat Source Electric Heat Kit Model ECB45-20CB AHRI Number 218630630 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-036 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHVT-036 Air Handler: Engineered for reliable performance and efficient airflow, featuring a variable-speed ECM blower motor for enhanced comfort control and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-10CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.5 Heating Efficiency (HSPF2) 7.8 Condenser Model ML16KP2-036 Condenser Stages Two Air Handler Model CBK45UHVT-036 Air Handler Stages Variable-Speed - Upflow/Horizontal Air Handler Capacity 036K Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 218457596 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-024 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK43UHET-030 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-10CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17 Heating Efficiency (HSPF2) 7.5 Condenser Model ML16KP2-024 Condenser Stages Two Air Handler Model CBK43UHET-030 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 030K Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 218472583 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-048 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK43UHET-060 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-15CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 16 Heating Efficiency (HSPF2) 8.1 Condenser Model ML16KP2-048 Condenser Stages Two Air Handler Model CBK43UHET-060 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 060K Heat Source Electric Heat Kit Model ECB45-15CB AHRI Number 218457822 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML16KP2-036 Heat Pump Condenser: A high-efficiency two-stage unit designed for optimal heating and cooling, featuring Lennox's durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK43UHET-036 Air Handler: Engineered for reliable performance and efficient airflow, featuring a multi-speed ECM blower motor engineered for two-stage operation and a corrosion-resistant aluminum coil for lasting performance and efficiency. It pairs seamlessly with Lennox outdoor units, delivering quiet operation, improved humidity control, and lasting efficiency. ECB45-10CB Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 16.5 Heating Efficiency (HSPF2) 8.2 Condenser Model ML16KP2-036 Condenser Stages Two Air Handler Model CBK43UHET-036 Air Handler Stages Two-Stage Compatible - Multi-Speed ECM Motor - Upflow/Horizontal Air Handler Capacity 036K Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 218457673 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS INSTALL INSTRUCTIONS Cedar Park Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in Cedar Park, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

Read more less

What's Included: The Lennox CK40HT-51/61C evaporator coil from Cedar Park Heat and Air is a high-efficiency, cased coil designed to improve the performance and reliability of your residential HVAC unit. With an all-aluminum design, this horizontal coil offers excellent heat transfer, durability, and quiet operation " ideal for Lennox air conditioners, heat pumps, and furnaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and basic installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and supply a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Cased Design: Ensures easy installation and compatibility with Lennox HVAC systems. All-Aluminum Construction: Resists corrosion and extends coil life in harsh environments. High-Efficiency Heat Transfer: Enhances comfort and system performance year-round. Quiet Operation: Minimizes noise for a peaceful indoor environment. OEM-Compatible: Specifically designed for Lennox furnaces and outdoor units.   Coil Model CK40HT-51/61C Type Cased Evaporator Coil Cabinet Size C Capacity Range 4 to 5 tons Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM)

Read more less

What's Included: The Lennox ML180UH110V60C furnace from Cedar Park Heat and Air delivers reliable heating and energy efficiency at an affordable price, ideal for homeowners seeking comfort and energy savings. This durable single-stage gas furnace provides consistent warmth while reducing heating costs. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will review on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating with electricity-conscious operation for cost-effective comfort. Single-Stage Operation: Provides steady, reliable heating for consistent comfort. Durable Steel Cabinet: Ensures long-lasting performance with a wear-resistant design that reduces maintenance. Flexible Installation Options: Compact and versatile to fit various spaces and layouts. Quiet Operation: Designed to minimize noise for a comfortable home environment. The Lennox ML180UH110V60C furnace from Cedar Park Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Lennox cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model ML180UH110V60C Capacity (BTU) 180K Stages Single-Stage Cabinet Size c AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The Lennox ML17KC2-048 Air Conditioner from Cedar Park Heat and Air delivers 48,000 BTUs (4 Ton) of reliable, fuel-efficient cooling, ideal for residential comfort. Part of Lennox's Merit Series, this unit offers superior performance and affordability for years of dependable operation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of deployment. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Cooling: Provides consistent performance with a SEER rating up to 17, reducing electricity costs. Proven Scroll Compressor: Durable single-stage scroll compressor ensures reliable, quiet operation. Corrosion-Resistant Coil: High-efficiency coil resists outdoor corrosion and optimizes cooling. Durable Construction: Galvanized steel cabinet with baked-on powder coat protects against rust and weather. Quiet Operation: Innovative fan and compressor components minimize noise during use.   Condenser Model ML17KC2-048 Size/Tonnage 4-Ton Cooling Efficiency (SEER2) 17 Stages   Refrigerant R-454B Application Gas or Straight Cool Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

What's Included: The Lennox ML180UH110V60CK furnace from Cedar Park Heat and Air delivers consistent heating and energy efficiency at an affordable price, ideal for homeowners seeking comfort and energy savings. This durable single-stage gas furnace provides consistent warmth while reducing heating costs. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating with energy-conscious operation for cost-effective satisfaction. Single-Stage Operation: Provides steady, consistent heating for consistent comfort. Durable Steel Cabinet: Ensures long-lasting performance with a wear-resistant design that reduces maintenance. Flexible Installation Options: Compact and versatile to fit various spaces and layouts. Quiet Operation: Designed to minimize noise for a comfortable home environment. The Lennox ML180UH110V60CK furnace from Cedar Park Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Lennox cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model ML180UH110V60CK Capacity (BTU) 88K Stages Single-Stage Cabinet Size C AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less