What's Included: The Trane S9V2C080U5VSBB furnace offered by Cedar Park Heat and Air delivers superior efficiency and superior convenience with a 90% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its variable-speed blower motor and two-stage heating system provide better temperature control. Includes licensed and insured HVAC deployment by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 90% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Variable-Speed ECM Blower Motor: Improves airflow control, reduces noise, and enhances indoor air high-grade. Durable & Compact Design: Built for long-lasting performance with flexible installation options. Sealed Combustion System: Enhances safety and efficiency by reducing heat loss. Quiet Operation: Designed for smooth, low-noise operation. The Trane S9V2C080U5VSBB furnace from Cedar Park Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model S9V2C080U5VSBB Capacity (BTU) 80K Stages Variable Speed Cabinet Size   AFUE 90% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1A040M3PSCA furnace offered by Cedar Park Heat and Air delivers reliable heating with a 80% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its durable design ensures consistent warmth. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Single-Stage Heating: Provides reliable, consistent heating for steady warmth. Durable & Compact Design: Built for long-lasting performance with flexible installation options. Multi-Speed Blower: Improves airflow control for better comfort and system compatibility. Quiet Execution: Designed for smooth, low-noise operation. The Trane S8X1A040M3PSCA furnace from Cedar Park Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model S8X1A040M3PSCA Capacity (BTU) 40K Stages Single-Stage Cabinet Size   AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane 5TXCC007 evaporator coil offered by Cedar Park Heat and Air is designed to improve efficiency and performance in residential HVAC systems. Made with durable all-aluminum construction and advanced technology, it ensures optimal heat transfer and reliable execution for air conditioning and heat pump systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your house, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: All-Aluminum Construction: Resists corrosion and ensures long-term durability. Optimized Heat Transfer: Maximizes efficiency and cooling performance. Long-lasting Design: Withstands demanding conditions and reduces maintenance. Flexible Installation: Fits Trane furnaces, air handlers, and outdoor units. Quiet Operation: Minimizes noise for a comfortable indoor environment.   Coil Model 5TXCC007 Type Cased Cabinet Size C Capacity Range 3.5 to 4.0 tons Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM)

Read more less

What's Included: The Trane S8X1C080M5PSCA furnace offered by Cedar Park Heat and Air delivers reliable heat with a 80% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its durable design ensures consistent warmth. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Single-Stage Heating: Provides reliable, consistent heating for steady warmth. Durable & Compact Design: Built for long-lasting performance with flexible installation options. Multi-Speed Blower: Improves airflow control for better comfort and system compatibility. Quiet Operation: Designed for smooth, low-noise operation. The Trane S8X1C080M5PSCA furnace from Cedar Park Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model S8X1C080M5PSCA Capacity (BTU) 80K Stages Single-Stage Cabinet Size   AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Pieces, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8V2C080M5PCAA furnace offered by Cedar Park Heat and Air delivers reliable heating with a 80% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its variable-speed blower motor and two-stage heating system provide better temperature control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Variable-Speed ECM Blower Motor: Improves airflow control, reduces noise, and enhances indoor air quality. Durable & Compact Design: Built for long-lasting efficiency with flexible installation options. Multi-Speed Blower: Improves airflow control for better ease and system compatibility. Quiet Operation: Designed for smooth, low-noise operation. The Trane S8V2C080M5PCAA furnace from Cedar Park Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round well-being and performance.   Furnace Model S8V2C080M5PCAA Capacity (BTU) 80K Stages Variable Speed Cabinet Size   AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane 5TXCC009 evaporator coil offered by Cedar Park Heat and Air is designed to improve efficiency and performance in residential HVAC systems. Made with durable all-aluminum construction and advanced technology, it ensures optimal heat transfer and reliable operation for air conditioning and heat pump systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our setup causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: All-Aluminum Construction: Resists corrosion and ensures long-term durability. Optimized Heat Transfer: Maximizes efficiency and cooling performance. Durable Design: Withstands demanding conditions and reduces maintenance. Flexible Installation: Fits Trane furnaces, air handlers, and outdoor units. Quiet Performance: Minimizes noise for a comfortable indoor environment.   Coil Model 5TXCC009 Type Cased Cabinet Size D Capacity Range 3.5 to 5.0 tons Refrigerant R-454B Warranty 10 Year Pieces, 10 Year Cased and Uncased Coil (When Registered with OEM)

Read more less

What's Included: The Trane 5TXCA002 evaporator coil offered by Cedar Park Heat and Air is designed to improve efficiency and performance in residential HVAC systems. Made with sturdy all-aluminum construction and advanced technology, it ensures optimal heat transfer and reliable operation for air conditioning and heat pump systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finalize setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our fitting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: All-Aluminum Construction: Resists corrosion and ensures long-term durability. Optimized Heat Transfer: Maximizes efficiency and cooling performance. Durable Design: Withstands demanding conditions and reduces maintenance. Flexible Fitting: Fits Trane furnaces, air handlers, and outdoor units. Quiet Operation: Minimizes noise for a comfortable indoor environment.   Coil Model 5TXCA002 Type Cased Cabinet Size A Capacity Range 1.5 - 3-Ton Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM)

Read more less

What's Included: The Trane 5TXCB004 evaporator coil offered by Cedar Park Heat and Air is designed to improve efficiency and performance in residential HVAC systems. Made with durable all-aluminum construction and advanced technology, it ensures optimal heat transfer and reliable operation for air conditioning and heat pump systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finalize setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the typical disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our mounting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: All-Aluminum Construction: Resists corrosion and ensures long-term durability. Optimized Heat Transfer: Maximizes efficiency and cooling effectiveness. Durable Design: Withstands demanding conditions and reduces maintenance. Flexible Installation: Fits Trane furnaces, air handlers, and outdoor units. Quiet Operation: Minimizes noise for a comfortable indoor environment.   Coil Model 5TXCB004 Type Cased Cabinet Size  B Capacity Range 2 - 3.5-Ton Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM)

Read more less

What's Included: The Trane 5TXCB006 evaporator coil offered by Cedar Park Heat and Air is designed to improve efficiency and performance in residential HVAC systems. Made with durable all-aluminum construction and advanced technology, it ensures optimal heat transfer and trustworthy execution for air conditioning and heat pump systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (typical composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our setup causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: All-Aluminum Construction: Resists corrosion and ensures long-term durability. Optimized Heat Transfer: Maximizes efficiency and cooling performance. Durable Design: Withstands demanding conditions and reduces maintenance. Flexible Installation: Fits Trane furnaces, air handlers, and outdoor units. Quiet Operation: Minimizes noise for a comfortable indoor environment. Coil Model 5TXCB006 Type Cased Cabinet Size C Capacity Range 2.5€“5 Tons Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM)

Read more less

What's Included: The Trane 5TXC evaporator coil from Cedar Park Heat and Air improves efficiency and performance of residential HVAC systems. Made with durable materials and advanced technology, it ensures optimal heat transfer and reliable operation for air conditioning and heat pump systems. Compatible with Trane furnaces and air handlers, the 5TXC coil is key for maximum comfort and power efficiency at home. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Elements replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: All-Aluminum Construction: Resists corrosion and ensures long-term durability. Optimized Heat Transfer: Maximizes efficiency and cooling performance. Long-lasting Design: Withstands demanding conditions and reduces maintenance. Flexible Installation Options: Fits Trane furnaces, air handlers, and outdoor units. Quiet Operation: Minimizes noise for a comfortable indoor environment. The Trane 5TXC coil is ideal for homeowners seeking improved setup performance and reliability. Paired with a Trane air conditioner, heat pump, or furnace, it delivers efficient and dependable climate control year-round.   Coil Model 5TXCC005AS3HCA Type Cased Cabinet Size C Capacity Range 2-4-Ton Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM) RESOURCES Evaporator Coil LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane is a globally trusted leader in home comfort, delivering high-performance HVAC systems built for efficiency, reliability, and innovation. Whether upgrading or installing new, Trane provides advanced solutions to keep your home comfortable year-round. What's Included: Trane Condenser: A single-stage, energy-efficient air conditioner condenser with Trane's ClimatUFF® compressor and spine fin coil for reliable, quiet residential cooling. Trane Furnace: A 90% Variable Speed AFUE single-stage gas furnace with consistent, reliable heating output and durable construction. Trane Evaporator Coil: An all-aluminum cased coil for upflow/downflow applications with corrosion-resistant construction and factory-installed TXV for precise refrigerant control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4018 Condenser Stages Single Furnace Model S9V2B040U3VSBB Furnace Stages Two Furnace Efficiency 90% Variable Speed Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215557630 Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM)

Read more less

Trane is a globally trusted leader in home comfort, delivering high-performance HVAC systems built for efficiency, reliability, and innovation. Whether upgrading or installing new, Trane provides advanced solutions to keep your home comfortable year-round. What's Included: Trane Condenser: A single-stage, power-efficient air conditioner condenser with Trane's ClimatUFF® compressor and spine fin coil for reliable, quiet residential cooling. Trane Furnace: A 90% AFUE single-stage gas furnace with consistent, reliable heating output and robust construction. Trane Evaporator Coil: An all-aluminum cased coil for upflow/downflow applications with corrosion-resistant construction and factory-installed TXV for precise refrigerant control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4030 Condenser Stages Single Furnace Model S9X1B060U4PSBA Furnace Stages Single Furnace Efficiency 90% Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215558038 Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM)

Read more less

Trane is a globally trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Trane products meet top residential heating and cooling standards. Whether upgrading or installing new, Trane provides advanced solutions to keep your home comfortable year-round. What's Included: 5TWR Heat Pump Condenser: Provides reliable heating and cooling with high energy efficiency and quiet operation. Built for durability and consistent comfort in all weather. 5TEM4 Air Handler: Includes a multi-speed blower for enhanced airflow, consistent temperature control, and quiet operation. Its all-aluminum coil offers long-lasting efficiency and corrosion resistance. BAYHTR Heat Kit: Provides supplemental electric heating for reliable warmth during colder months, ensuring year-round comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Heat Pump Condenser Model 5TWR4036 Heat Pump Condenser Stages   Air Handler Model 5TEM4D06AC31SA Air Handler Stages Single Air Handler Capacity (BTU)   Air Handler Cabinet Size   Heat Source Electric Heat Kit Model BAYHTR1510BRK AHRI Number   Refrigerant R-454B Warranty 10 Year Units, 10 Year Compressor (When Registered with OEM)

Read more less

Discover premium comfort with the Trane Heat Pump Unit offered by Cedar Park Heat and Air, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This equipment delivers excellent performance and energy efficiency, ideal for larger homes or spaces needing robust climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable temperature and cooling with high energy efficiency and quiet operation. Built for durability and reliable performance in all weather, it ensures consistent comfort year-round. 5TEM6 Air Handler: With a multi-speed blower, it delivers enhanced airflow, consistent temperature control, and quiet operation. Its all-aluminum coil offers long-lasting efficiency and corrosion resistance for excellent durability. BAYHTR Heat Kits: Provides electric heat backup for additional warmth during colder months, ensuring reliable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM elements warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5048 Heat Pump Condenser Stages Single Air Handler Model 5TEM4D06AC41SA Air Handler Stages Single Air Handler Capacity (BTU) 36k-48k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1517BRKA Heat Kit Output 17KW AHRI 215610955 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL  

Read more less

Experience efficient and reliable comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. This unit includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable comfort in extreme temperatures. S8X1 Gas Furnace: Provides powerful, consistent heating with a single-stage gas valve, focusing on efficiency and long-term reliability. 5TXC Coil: Enhances heat transfer for thermal and cooling with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will review on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Pieces replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4018 Condenser Stages Single Furnace Model S8X1B040M2PSCA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215557580 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY  

Read more less

Experience efficient and reliable comfort with a complete Trane Gas HVAC System offered by Cedar Park Heat and Air. It includes a powerful air conditioner, a dependable gas furnace, and a top-tier indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet running for reliable performance in extreme temperatures. S8X2 Gas Furnace: Provides energy-efficient heating with a two-stage gas valve for better temperature control and quieter operation, ensuring dependable warmth during peak demand. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4018 Condenser Stages Single Furnace Model S8X2A040M3PSCA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 215557568 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. It includes a powerful air conditioner, a dependable gas furnace, and a top-tier indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with quiet execution and reliable performance in extreme temperatures. S8X1 Gas Furnace: Provides consistent heating with a single-stage gas valve, focusing on efficiency and long-term reliability. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for durability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and typical installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will examine on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4024 Condenser Stages Single Furnace Model S8X1B040M2PSCA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215557704 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and dependable comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. This system includes a powerful air conditioner, a dependable gas furnace, and a top-tier indoor coil, designed for stable year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S9X1 Gas Furnace Provides powerful, consistent warming with a high-efficiency single-stage gas valve and durable construction, enhancing energy savings while keeping your home warm. 5TXC Coil: Optimizes heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4018 Condenser Stages Single Furnace Model S9X1B040U3PSBA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215557640 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience the perfect balance of efficiency and reliability with a perform Trane Gas HVAC System offered by Cedar Park Heat and Air. Featuring a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, this system provides stable heating and cooling while maximizing energy efficiency and durability. What's Included: 5TTR40 Air Conditioner Engineered for high-efficiency cooling, this durable unit performs reliably in extreme temperatures and operates quietly to keep your home comfortable. S8V2 Gas Furnace: Offers premium convenience and efficiency with a variable-speed blower motor and two-stage gas valve, ensuring consistent temperatures, quiet operation, and improved indoor air quality. It adapts to your home's needs for optimal energy savings year-round. 5TXC Coil: Optimizes heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC fitting by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and supply a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4018 Condenser Stages Single Furnace Model S8V2A040M3PCBA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 215557560 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

Experience efficient and dependable comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S9X1 Gas Furnace Provides powerful, consistent heating with a high-efficiency single-stage gas valve and durable construction, enhancing energy savings and indoor satisfaction. 5TXC Coil: Optimizes heat transfer for heating and cooling with corrosion-resistant construction for lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (basic composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and supply a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Condenser Model 5TTR4024 Condenser Stages Single Furnace Model S9X1B040U3PSBA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215557716 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS

Read more less

Experience efficient and trustworthy comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for consistent heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S8V2 Gas Furnace: Provides comfort and efficiency with a variable-speed blower motor and two-stage gas valve for reliable temperatures, quiet operation, and improved indoor air high-grade. It adapts to your home's needs for energy savings year-round. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4024 Condenser Stages Single Furnace Model S8V2A040M3PCBA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 215557664 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

Experience efficient, reliable comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with quiet, robust operation even in extreme temperatures. S8X2 Gas Furnace: Reliable, energy-effective heating with a two-stage gas valve for better temperature control and quieter operation, providing dependable warmth during peak demand. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4024 Condenser Stages Single Furnace Model S8X2A040M3PSCA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 215557670 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient, reliable comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, built for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with quiet, stable performance even in extreme temperatures. S9V2 Gas Furnace: Combines high efficiency with ultra-quiet, precise comfort using a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for excellent heating, airflow, and resources savings. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and conventional fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4024 Condenser Stages Single Furnace Model S9V2B040U3VSBB Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215557754 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane Gas HVAC System from Cedar Park Heat and Air. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable comfort in extreme temperatures. S8X1 Gas Furnace: Provides powerful, consistent heating with a single-stage gas valve, focusing on efficiency and long-term reliability. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model 5TTR4030 Condenser Stages Single Furnace Model S8X1B060M4PSCA Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215557974 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less