What's Included: The RunTru A952V furnace offered by Cedar Park Heat and Air delivers advanced heating with energy efficiency and comfort. Featuring a variable-speed blower and a 95% AFUE rating, it provides precise temperature control and lowers energy costs. Built for durability and reliability, the A952V is part of the trusted Trane family, offering quiet, consistent performance for residential temperature. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a perform setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: High Efficiency: 95% AFUE rating for energy savings and lower utility bills. Variable-Speed Blower: Adjusts airflow for better comfort and efficiency. Two-Stage Heating: Provides consistent warmth while optimizing energy use. Durable Construction: Made with quality materials for reliable performance. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A952V furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking comfort and efficiency. When paired with a compatible RunTru or Trane cooling system, it forms a complete HVAC solution for year-round climate control and reliable performance.   Furnace Model A952V100CU5SBA Capacity (BTU) 100K Stages Two-Stage Cabinet Size C AFUE 96% Configuration Upflow/ Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and expert support,

Read more less

What's Included: The RunTru A952V furnace offered by Cedar Park Heat and Air delivers advanced heating with energy efficiency and comfort. Featuring a variable-speed blower and a 95% AFUE rating, it provides precise temperature control and lowers energy costs. Built for durability and reliability, the A952V is part of the trusted Trane family, offering quiet, consistent residential heating. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Mounting of new equipment and all included components Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: High Efficiency: 95% AFUE rating for energy savings and lower utility bills. Variable-Speed Blower: Adjusts airflow for better comfort and efficiency. Two-Stage Heating: Provides consistent warmth while optimizing energy use. Robust Construction: Built with quality materials for reliable performance. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A952V furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking comfort and efficiency. When paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC solution for year-round climate control and reliability.   Furnace Model A952V060BU4SBA Capacity (BTU) 60K Stages Two-Stage Cabinet Size B AFUE 96% Configuration Upflow/ Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With a wide selection of trusted brands and expert

Read more less

What's Included: The RunTru A952V furnace offered by Cedar Park Heat and Air delivers advanced heating with energy efficiency and comfort. Featuring a variable-speed blower and a 95% AFUE rating, it provides precise temperature control and lowers energy costs. Built for durability and reliability, the A952V is part of the trusted Trane family, offering quiet, consistent residential heating. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: High Efficiency: 95% AFUE rating for energy savings and lower utility bills. Variable-Speed Blower: Adjusts airflow for improved comfort and efficiency. Two-Stage Heating: Provides steady warmth while optimizing energy use. Durable Construction: Made with quality materials for reliable performance. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A952V furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking comfort and efficiency. When paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC solution for year-round climate control and consistent operation.   Furnace Model A952V040BU3SBA Capacity (BTU) 40K Stages Two-Stage Cabinet Size B AFUE 96% Configuration Upflow/ Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heat, cooling, and ventilation systems. With a wide selection of trusted brands and expert support

Read more less

What's Included: The Trane S8V2 furnace offered by Cedar Park Heat and Air delivers high-efficiency heating with advanced comfort features, making it ideal for residential use. With an 80% AFUE rating, it provides reliable warmth while optimizing energy use. Its variable-speed blower and two-stage heating ensure precise temperature control, quieter operation, and better indoor air quality. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency Provides dependable heating with energy-conscious performance. Two-Stage Heating Adjusts heat output for improved well-being, efficiency, and consistent warmth. Variable-Speed Blower Enhances airflow control, reduces temperature swings, and boosts system performance. Durable & Reliable Design Made with premium materials for long-lasting operation and low maintenance. Versatile Installation Fits various home layouts and HVAC setups. The Trane S8V2 furnace offered by Cedar Park Heat and Air is a solid choice for homeowners seeking comfort, efficiency, and quiet operation. Paired with a Trane cooling equipment, it offers year-round climate control with optimized performance.   Furnace Model S8V2A040M3PCBA Capacity (BTU) 40K Stages Variable-Speed Cabinet Size A AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1 furnace offered by Cedar Park Heat and Air delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide consistent well-being and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating while managing energy costs. Single-Stage Heating: Ensures consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better comfort and system integration. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Fits various installation spaces. The Trane S8X1 furnace offered by Cedar Park Heat and Air is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort.   Furnace Model S8X1D120M5PSCC Capacity (BTU) 120K Stages Single-Stage Cabinet Size D AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace Electricity GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local    

Read more less

What's Included: The Trane S8X2 furnace offered by Cedar Park Heat and Air provides reliable, efficient heating for residential use. With an 80% AFUE rating, it balances energy savings and consistent warmth. Its two-stage heating and multi-speed blower improve comfort and temperature control for steady indoor climate management. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency Delivers cost-effective heating with energy savings. Two-Stage Heating Adjusts heat output for better comfort, efficiency, and quieter running. Multi-Speed Blower Improves airflow and system compatibility for balanced indoor air. Durable Construction Built with quality materials for long-lasting performance and low maintenance. Flexible Installation Fits various dwelling layouts and HVAC setups. The Trane S8X2 furnace offered by Cedar Park Heat and Air is a reliable choice for homeowners seeking efficiency and comfort. Paired with a Trane cooling system, it offers comprehensive year-round climate control.   Furnace Model S8X2A040M3PSCA Capacity (BTU) 40K Stages Two-Stage Cabinet Size A AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Pieces, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local <

Read more less

What's Included: The Goodman GR9S80 furnace offered by Cedar Park Heat and Air delivers reliable warming and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing resources costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Ensures reliable warmth with simple operation year-round. Quiet and Smooth Performance: Minimizes noise to enhance indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace life. Flexible Installation Options: Compact size and multiple airflow setups allow versatile installation. The Goodman GR9S80 furnace offered by Cedar Park Heat and Air is a reliable, cost-effective choice for homeowners prioritizing comfort and efficiency. When paired with Goodman air conditioners or heat pumps, it provides a execute heating and cooling solution year-round.   Furnace Model GR9S800403AN Capacity (BTU) 40K Stages Single-Stage Cabinet Size A Airflow Measurement (CFM) 1,200 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation

Read more less

What's Included: The Goodman GR9S80 furnace offered by Cedar Park Heat and Air delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and sturdy design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Offers reliable warmth with simple operation year-round. Quiet and Smooth Performance: Reduces noise for improved indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace life. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile deployment. The Goodman GR9S80 furnace offered by Cedar Park Heat and Air is a reliable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it provides a complete heating and cooling solution year-round.   Furnace Model GR9S800803BN Capacity (BTU) 80K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,200 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers are responsible for ensuring compliance with all local, state, and federal rules before purchase and installation.

Read more less

What's Included: The Goodman GR9S80 furnace offered by Cedar Park Heat and Air delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet execution ensure dependable efficiency and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard deployment scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Offers reliable warmth with simple operation year-round. Quiet and Smooth Performance: Minimizes noise for enhanced indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace lifespan. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace offered by Cedar Park Heat and Air is a reliable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it delivers a execute heating and cooling solution year-round.   Furnace Model GR9S800804CN Capacity (BTU) 80K Stages Single-Stage Cabinet Size C Airflow Measurement (CFM) 1,600 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation.  

Read more less

What's Included: A quiet, energy-efficient blower motor runs at the lowest speed needed to furnish precise temperature control and reduce energy use, helping lower utility bills compared to single-speed motors. Includes licensed and insured HVAC setup by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (conventional thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will inspect on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Furnace Model GM9S800805CNA Capacity 5 Ton Motor Single Stage AFUE 80% BTUh 80,000 Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace PRODUCT BROCHURE LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Goodman GR9S96 furnace offered by Cedar Park Heat and Air delivers consistent heating and high energy efficiency at an affordable price, ideal for residential use. With a 96% AFUE rating and durable design, it provides consistent warmth while lowering heating costs. Built for efficiency and reliability, this furnace is a solid choice for homeowners seeking long-term comfort backed by Goodman s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will evaluate on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our fitting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts most fuel into heat for energy-efficient performance and lower bills. Single-Stage Operation: Offers steady, reliable heating for consistent comfort. Multi-Speed ECM Blower Motor: Improves airflow efficiency and system performance. Aluminized Steel Heat Exchanger: Ensures durability and efficient heat transfer. Quiet Operation: Features sound-reducing design to minimize noise. Flexible Installation Options: Supports upflow and horizontal setups to fit various layouts. The Goodman GR9S96 furnace offered by Cedar Park Heat and Air is a practical, energy-efficient, and reliable heating solution. Pair it with a Goodman cooling system for a perform HVAC setup providing year-round comfort and performance.   Furnace Model GR9S960603BN Capacity (BTU) 60K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,200 AFUE 96% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Goodman GR9S80 furnace offered by Cedar Park Heat and Air delivers reliable heating and energy efficiency, ideal for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line deployment Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Ensures reliable warmth with simple performance year-round. Quiet and Smooth Performance: Reduces noise for enhanced indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace life. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace offered by Cedar Park Heat and Air is a stable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it offers a complete heating and cooling solution year-round.   Furnace Model GR9S800604BN Capacity (BTU) 60K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,600 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchasing and installing a furnace.  

Read more less

What's Included: The Goodman GR9S80 furnace offered by Cedar Park Heat and Air delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our fitting causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Ensures reliable warmth with simple operation year-round. Quiet and Smooth Efficiency: Minimizes noise for enhanced indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace lifespan. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace offered by Cedar Park Heat and Air is a reliable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it provides a complete heating and cooling solution year-round.   Furnace Model GR9S800804BN Capacity (BTU) 80K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,600 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation. We are not liable for

Read more less

What's Included: The Goodman GR9S80 furnace offered by Cedar Park Heat and Air delivers consistent heating and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-conscious heating to reduce operating costs. Single-Stage Heating: Ensures reliable warmth with simple operation year-round. Quiet and Smooth Performance: Reduces noise for enhanced indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace lifespan. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile mounting. The Goodman GR9S80 furnace offered by Cedar Park Heat and Air is a reliable, cost-effective choice for homeowners seeking convenience and efficiency. When paired with Goodman air conditioning or heat pump systems, it provides a complete heating and cooling solution year-round.   Furnace Model GM9S801005CN Capacity (BTU) 100K Stages Single-Stage Cabinet Size C Airflow Measurement (CFM) 2,000 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS  

Read more less

What's Included: The Goodman GR9S80 furnace offered by Cedar Park Heat and Air delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Warming: Offers reliable warmth with simple operation year-round. Quiet and Smooth Performance: Reduces noise for enhanced indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace life. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace offered by Cedar Park Heat and Air is a reliable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it provides a complete heating and cooling solution year-round.   Furnace Model GR9S801205DN Capacity (BTU) 120K Stages Single-Stage Cabinet Size D Airflow Measurement (CFM) 2,000 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS  

Read more less

What's Included: The Goodman GR9S96 furnace offered by Cedar Park Heat and Air delivers reliable heating and high energy efficiency at an affordable price, ideal for residential use. With a 96% AFUE rating and durable design, it provides consistent warmth while lowering heating costs. Built for efficiency and reliability, this furnace is a solid choice for homeowners seeking long-term comfort backed by Goodman s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts most fuel into heat for energy-efficient operation and lower utility bills. Single-Stage Operation: Provides steady, reliable heating for consistent home comfort. Multi-Speed ECM Blower Motor: Improves airflow efficiency, enhancing indoor comfort and system performance. Aluminized Steel Heat Exchanger: Ensures long-lasting durability and efficient heat transfer. Quiet Operation: Designed with sound-reducing features to minimize noise. Flexible Installation Options: Supports upflow and horizontal configurations to fit various home layouts. The Goodman GR9S96 furnace offered by Cedar Park Heat and Air is a practical, energy-optimized, and dependable heating solution. Pair it with a Goodman cooling system for a finish HVAC setup providing year-round comfort and performance.   Furnace Model GR9S960803BN Capacity (BTU) 80K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,200 AFUE 96% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Goodman GRVT800 furnace offered by Cedar Park Heat and Air combines advanced airflow technology with energy efficiency to deliver reliable, quiet comfort in homes. With an 80% AFUE rating and a high-efficiency variable-speed blower, the GRVT800 improves performance and indoor comfort in various weather conditions. Includes licensed and insured HVAC mounting by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, exchange, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will inspect on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Key Features: 80% AFUE Efficiency: Provides dependable thermal with cost-effective energy use. Variable-Speed ECM Blower: Improves airflow precision, temperature consistency, and humidity control with compatible cooling systems. Two-Stage Gas Valve: Offers steady, reliable heating output. Quiet Operation: Ensures smooth, low-noise performance for a peaceful home. Heavy-Gauge Steel Cabinet: Enhances durability and protects internal parts to extend equipment life. Multi-Position Installation: Fits various configuration layouts including upflow and horizontal configurations. The GRVT800 furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking efficient, consistent warmth and improved airflow at a value price. Paired with a Goodman air conditioner or heat pump, it forms a balanced, high-performance HVAC system for year-round comfort.   Furnace Model GRVT800804CN Capacity (BTU) 80K Stages Two-Stage Cabinet Size C Airflow Variable AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The Goodman GR9S96 furnace offered by Cedar Park Heat and Air delivers reliable heating and high energy efficiency at an affordable price, ideal for residential use. With a 96% AFUE rating and durable design, it provides consistent warmth while lowering heating costs. Built for efficiency and reliability, this furnace is a solid choice for homeowners seeking long-term convenience backed by Goodman s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Elements replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts most fuel into heat for energy-efficient operation and lower utility bills. Single-Stage Operation: Provides steady, reliable heating for consistent home comfort. Multi-Speed ECM Blower Motor: Improves airflow efficiency, enhancing indoor comfort and system performance. Aluminized Steel Heat Exchanger: Ensures long-lasting durability and efficient heat transfer. Quiet Operation: Designed with sound-reducing features to minimize noise. Flexible Deployment Options: Supports upflow and horizontal configurations to fit various home layouts. The Goodman GR9S96 furnace offered by Cedar Park Heat and Air is a practical, energy-efficient, and dependable heating solution. Pair it with a Goodman cooling system for a finalize HVAC setup providing year-round comfort and performance.   Furnace Model GR9S960804CN Capacity (BTU) 80K Stages Single-Stage Cabinet Size C Airflow Measurement (CFM) 1,600 AFUE 96% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Goodman GR9S96 furnace offered by Cedar Park Heat and Air delivers trustworthy warming and high energy efficiency at an affordable price, ideal for residential use. With a 96% AFUE rating and durable design, it provides consistent warmth while lowering heating costs. Built for efficiency and reliability, this furnace is a solid choice for homeowners seeking long-term comfort backed by Goodman s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts most fuel into heat for energy-saving operation and lower bills. Single-Stage Operation: Offers steady, reliable heating for consistent home comfort. Multi-Speed ECM Blower Motor: Improves airflow efficiency and system performance. Aluminized Steel Heat Exchanger: Ensures long-lasting durability and efficient heat transfer. Quiet Operation: Designed with sound-reducing features to minimize noise. Flexible Installation Options: Supports upflow and horizontal setups to fit various layouts. The Goodman GR9S96 furnace offered by Cedar Park Heat and Air is a practical, power-efficient, and dependable heating solution. Pair it with a Goodman cooling system for a complete HVAC setup providing year-round comfort and performance.   Furnace Model GR9S961205DN Capacity (BTU) 120K Stages Single-Stage Cabinet Size D Airflow Measurement (CFM) 2,000 AFUE 96% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Goodman GRVT800 furnace offered by Cedar Park Heat and Air combines advanced airflow technology with energy efficiency to deliver reliable comfort and quiet execution in homes. With an 80% AFUE rating and a high-efficiency variable-speed blower, the GRVT800 improves performance and indoor comfort in various weather conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation:: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our setup causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides dependable heating with cost-effective energy use. Variable-Speed ECM Blower: Improves airflow precision, temperature consistency, and humidity control with compatible cooling systems. Two-Stage Gas Valve: Ensures steady, reliable heating output. Quiet Operation: Designed for smooth, low-noise performance for a peaceful home. Heavy-Gauge Steel Cabinet: Enhances durability and protects internal elements for longer equipment life. Multi-Position Installation: Fits various system layouts including upflow and horizontal configurations. The GRVT800 furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking efficient, consistent warmth and improved airflow at a value price. Paired with a Goodman air conditioner or heat pump, it creates a balanced, high-efficiency HVAC system for year-round comfort.   Furnace Model GRVT800803BN Capacity (BTU) 80K Stages Two-Stage Cabinet Size B Airflow Variable AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The Goodman GR9S96 furnace offered by Cedar Park Heat and Air delivers reliable heating and high energy efficiency at an affordable price, ideal for residential use. With a 96% AFUE rating and durable design, it provides consistent warmth while lowering warming costs. Built for efficiency and reliability, this furnace is a solid choice for homeowners seeking long-term comfort backed by Goodman s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of fitting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts most fuel into heat for energy-efficient operation and lower utility bills. Single-Stage Operation: Provides steady, reliable heating for consistent home ease. Multi-Speed ECM Blower Motor: Improves airflow efficiency and system performance. Aluminized Steel Heat Exchanger: Ensures long-lasting durability and efficient heat transfer. Quiet Operation: Designed with sound-reducing features to minimize noise. Flexible Installation Options: Supports upflow and horizontal setups to fit various home layouts. The Goodman GR9S96 furnace offered by Cedar Park Heat and Air is a practical, energy-efficient, and dependable heating solution. Pair it with a Goodman cooling system for a complete HVAC setup that ensures year-round comfort and performance.   Furnace Model GR9S961005CN Capacity (BTU) 100K Stages Single-Stage Cabinet Size C Airflow Measurement (CFM) 2,000 AFUE 96% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Goodman GR9S96 furnace offered by Cedar Park Heat and Air delivers reliable heating and high energy efficiency at an affordable price, ideal for residential use. With a 96% AFUE rating and durable design, it provides consistent warmth while lowering heating costs. Built for efficiency and reliability, this furnace is a solid choice for homeowners seeking long-term comfort backed by Goodman s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and basic installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts most fuel into heat for energy-efficient operation and lower utility bills. Single-Stage Operation: Provides steady, reliable heating for consistent home comfort. Multi-Speed ECM Blower Motor: Improves airflow efficiency, enhancing indoor comfort and system performance. Aluminized Steel Heat Exchanger: Ensures long-lasting durability and efficient heat transfer. Quiet Operation: Features sound-reducing design to minimize noise. Flexible Installation Options: Supports upflow and horizontal setups to fit various home layouts. The Goodman GR9S96 furnace offered by Cedar Park Heat and Air is a practical, electricity-efficient, and dependable heating solution. Pair it with a Goodman cooling system for a complete HVAC setup that delivers year-round comfort and performance.   Furnace Model GR9S960805CN Capacity (BTU) 80K Stages Single-Stage Cabinet Size C Airflow Measurement (CFM) 2,000 AFUE 96% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Goodman GRVT800 furnace offered by Cedar Park Heat and Air combines advanced airflow technology with energy efficiency to deliver reliable, quiet comfort in homes. With an 80% AFUE rating and a high-efficiency variable-speed blower, the GRVT800 improves performance and indoor comfort in various weather conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after deployment If any of the above are needed for your home, our technician will review on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Pieces replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides dependable heating with cost-effective energy use. Variable-Speed ECM Blower: Improves airflow precision, temperature consistency, and humidity control with compatible cooling systems. Two-Stage Gas Valve: Ensures steady, reliable heating output. Quiet Operation: Designed for smooth, low-noise performance for a peaceful home. Heavy-Gauge Steel Cabinet: Enhances durability and protects internal parts to extend equipment life. Multi-Position Fitting: Fits various layouts including upflow and horizontal configurations. The GRVT800 furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking efficient, consistent warmth and improved airflow at a value price. Paired with a Goodman air conditioner or heat pump, it forms a balanced, high-performance HVAC setup for year-round comfort.   Furnace Model GRVT800603BN Capacity (BTU) 60K Stages Two-Stage Cabinet Size B Airflow Variable AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The Goodman GRVT800 furnace offered by Cedar Park Heat and Air combines advanced airflow technology with energy efficiency for reliable, quiet residential comfort. With an 80% AFUE rating and a high-efficiency variable-speed blower, the GRVT800 improves performance and indoor comfort in various weather conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of setup. If a covered defect related to our mounting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides dependable heating with cost-effective fuel use. Variable-Speed ECM Blower: Improves airflow precision, temperature consistency, and humidity control with compatible cooling systems. Two-Stage Gas Valve: Ensures steady, trustworthy heating output. Quiet Operation: Designed for smooth, low-noise performance for a peaceful home. Heavy-Gauge Steel Cabinet: Enhances durability and protects internal parts to extend equipment life. Multi-Position Installation: Supports various layouts including upflow and horizontal configurations. The GRVT800 furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking efficient, consistent warmth and improved airflow at a value price. Paired with a Goodman air conditioner or heat pump, it creates a balanced, high-performance HVAC unit for year-round comfort.   Furnace Model GRVT800805CN Capacity (BTU) 80K Stages Two-Stage Cabinet Size C Airflow Variable AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less