What's Included: The Trane S9X1 furnace offered by Cedar Park Heat and Air delivers reliable, energy-efficient heating for residential use. With a 96% AFUE rating, it ensures excellent energy savings and consistent indoor convenience. Its single-stage heating system and constant torque ECM blower motor provide dependable performance with improved airflow and efficiency. Includes licensed and insured HVAC fitting by professionals, along with the Install Kit for a finish setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency Maximizes energy savings while delivering consistent heating. Single-Stage Heating Offers simple, reliable operation for steady warmth. Constant Torque ECM Blower Motor Boosts efficiency, airflow control, and system compatibility. Durable & Compact Design Built for longevity and flexible installation in various dwelling layouts. Sealed Combustion System Enhances safety and efficiency by reducing heat loss. The Trane S9X1 furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking high efficiency and reliable comfort. Paired with a Trane cooling system, it provides year-round climate control with optimized energy use.   Furnace Model S9X1B040U3PSBA Capacity (BTU) 40K Stages Single Cabinet Size B AFUE 96% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1 furnace offered by Cedar Park Heat and Air delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide consistent comfort and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finalize setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (basic composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will examine on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of fitting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating while managing energy costs. Single-Stage Heating: Ensures consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better comfort and system integration. Durable Design: Built with quality components for longevity and low maintenance. Compact Footprint: Fits various installation spaces. The Trane S8X1 furnace offered by Cedar Park Heat and Air is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort.   Furnace Model S8X1C100M5PSCB Capacity (BTU) 100K Stages Single-Stage Cabinet Size C AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The RunTru A801X furnace offered by Cedar Park Heat and Air delivers reliable heating at an affordable price, ideal for residential use. With an 80% AFUE rating and a multi-speed blower, it ensures consistent comfort and energy efficiency. Built with durable materials and easy to install, the A801X offers dependable performance backed by the trusted Trane brand. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and basic installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will review on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our mounting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating with energy-conscious performance. Multi-Speed Blower: Offers flexible airflow for better comfort and compatibility. Durable Construction: Ensures long-term reliability and less maintenance. Compact Design: Fits various installation spaces for flexibility. Quiet Operation: Minimizes noise for a comfortable indoor environment. The RunTru A801X furnace offered by Cedar Park Heat and Air is a solid choice for homeowners seeking an affordable, efficient, and durable heating solution. When paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC setup for consistent year-round comfort.   Furnace Model A801X060BM4SDA Capacity (BTU) 60K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The RunTru A951X furnace offered by Cedar Park Heat and Air delivers dependable performance and energy efficiency for residential heating. Its advanced design and durable build provide consistent warmth while reducing energy costs. As part of the trusted Trane family, the A951X ensures long-term reliability and quiet operation for lasting comfort and peace of mind. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Includes: High Efficiency: 95% AFUE rating reduces energy use and heating costs. Multi-Speed Blower: Flexible airflow improves comfort and system efficiency. Durable Build: Made with robust materials for extended lifespan. Compact Design: Fits easily into various residential spaces. Quiet Operation: Minimizes noise for a comfortable indoor environment. The RunTru A951X furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking an energy-efficient, reliable heating solution. Paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC setup for year-round comfort.   Furnace Model A951X040BD3SAB Capacity (BTU) 40K Stages Single-Stage Cabinet Size B AFUE 96% Configuration Downflow Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and expert support, we simplify HVAC installation and maintenance. Professional Installation services are available in select areas for a seamless experience.  

Read more less

What's Included: The RunTru A801X furnace offered by Cedar Park Heat and Air delivers reliable heating at an affordable price, ideal for residential use. With an 80% AFUE rating and multi-speed blower, it ensures consistent comfort and energy efficiency. Built with durable materials and easy installation in mind, the A801X offers dependable performance backed by the trusted Trane family. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full unit start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the typical disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing added is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating with energy-conscious performance. Multi-Speed Blower: Offers flexible airflow for better comfort and system compatibility. Long-lasting Construction: Ensures long-term reliability and less maintenance. Compact Design: Fits various installation spaces for flexibility. Quiet Operation: Minimizes noise for a comfortable indoor environment. The RunTru A801X furnace offered by Cedar Park Heat and Air is a solid choice for homeowners seeking an affordable, efficient, and durable heating solution. When paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC setup for year-round comfort.   Furnace Model A801X040BM2SDA Capacity (BTU) 40K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems

Read more less

What's Included: The RunTru A801X furnace offered by Cedar Park Heat and Air delivers reliable heating at an affordable price, ideal for residential use. With an 80% AFUE rating and multi-speed blower, it ensures consistent comfort and energy efficiency. Built with durable materials and designed for easy setup, the A801X offers dependable performance backed by the established Trane brand. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the basic disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating with energy-conscious performance. Multi-Speed Blower: Offers flexible airflow for better comfort and system compatibility. Durable Construction: Ensures long-term reliability and less maintenance. Compact Design: Fits various installation spaces for flexibility. Quiet Operation: Minimizes noise for a comfortable indoor environment. The RunTru A801X furnace offered by Cedar Park Heat and Air is an affordable, efficient, and durable heating solution. When paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC setup for year-round comfort.   Furnace Model A801X100CM5SDB Capacity (BTU) 100K Stages Single-Stage Cabinet Size C AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide quality HVAC equipment, parts, and accessories for residential and light commercial heat, cooling, and ventilation systems. With trusted brands and expert support, we simplify HVAC installation

Read more less

What's Included: The RunTru A801X furnace offered by Cedar Park Heat and Air delivers reliable heating at an affordable price, ideal for residential use. With an 80% AFUE rating and a multi-speed blower, it ensures efficient comfort. Built with durable materials and easy installation in mind, the A801X offers consistent performance backed by the trusted Trane family. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Elements replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating with energy-conscious performance. Multi-Speed Blower: Offers flexible airflow for better comfort and system compatibility. Durable Construction: Ensures long-term reliability and less maintenance. Compact Design: Fits various deployment spaces for flexibility. Quiet Operation: Minimizes noise for a comfortable indoor environment. The RunTru A801X furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking an affordable, efficient, and durable heating solution. Paired with a compatible RunTru or Trane cooling equipment, it creates a complete HVAC setup for year-round comfort.   Furnace Model A801X080BM4SDA Capacity (BTU) 80K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS  

Read more less

What's Included: The RunTru A952V furnace offered by Cedar Park Heat and Air delivers advanced heating with energy efficiency and comfort. Featuring a variable-speed blower and a 95% AFUE rating, it provides precise temperature control and lowers fuel costs. Built for durability and reliability, the A952V is part of the trusted Trane family, offering quiet, consistent residential warming. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: High Efficiency: 95% AFUE rating for energy savings and lower utility bills. Variable-Speed Blower: Adjusts airflow for better comfort and efficiency. Two-Stage Heating: Provides consistent warmth while optimizing energy use. Durable Construction: Made with high-grade materials for reliable performance. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A952V furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking comfort and efficiency. When paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC solution for year-round climate control and reliable performance.   Furnace Model A952V080BU4SBA Capacity (BTU) 80K Stages Two-Stage Cabinet Size B AFUE 96% Configuration Upflow/ Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide high-superior HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With a wide selection of trusted brands and expert customer

Read more less

What's Included: The RunTru A951X furnace offered by Cedar Park Heat and Air delivers reliable effectiveness and energy efficiency, ideal for residential heating. Its advanced design and durable build provide consistent warmth while reducing energy costs. As part of the trusted Trane family, the A951X ensures long-term reliability and quiet operation for lasting comfort and peace of mind. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, installation, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: High Efficiency: 95% AFUE rating reduces energy use and heating costs. Multi-Speed Blower: Flexible airflow enhances comfort and system efficiency. Durable Build: Made with robust materials for extended furnace life. Compact Design: Fits easily into various residential spaces. Quiet Operation: Minimizes noise for a comfortable indoor environment. The RunTru A951X furnace offered by Cedar Park Heat and Air is a dependable, energy-efficient heating solution. When paired with a compatible RunTru or Trane cooling system, it creates a perform HVAC setup for year-round comfort.   Furnace Model A951X100CU5SAC Capacity (BTU) 100K Stages Single-Stage Cabinet Size C AFUE 96% Configuration Upflow/ Horizontal Left/Right Warranty 10 Year Elements, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and expert support, we simplify HVAC needs by delivering reliable products and solutions. We also offer professional installation services in select areas for a seamless experience.  

Read more less

What's Included: The Trane S8X1 furnace offered by Cedar Park Heat and Air delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide stable comfort and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides productive heating while managing energy costs. Single-Stage Heating: Ensures reliable, consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better comfort and system integration. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Allows versatile installation in various spaces. The Trane S8X1 furnace offered by Cedar Park Heat and Air is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort.   Furnace Model S8X1B040M2PSCA Capacity (BTU) 40K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1 furnace offered by Cedar Park Heat and Air delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide consistent comfort and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating while managing energy costs. Single-Stage Heating: Ensures consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better convenience and system integration. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Fits various spaces with versatile installation options. The Trane S8X1 furnace offered by Cedar Park Heat and Air is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort.   Furnace Model S8X1B060M4PSCB Capacity (BTU) 60K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1 furnace offered by Cedar Park Heat and Air delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide steady comfort and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides efficient heating while managing energy costs. Single-Stage Heating: Ensures stable, consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better comfort and system compatibility. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Allows versatile installation in various spaces. The Trane S8X1 furnace offered by Cedar Park Heat and Air is a dependable, efficient thermal solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round ease.   Furnace Model S8X1C080M5PSCC Capacity (BTU) 80K Stages Single-Stage Cabinet Size C AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The RunTru A952V furnace offered by Cedar Park Heat and Air delivers advanced heating with energy efficiency and comfort. Featuring a variable-speed blower and a 95% AFUE rating, it provides precise temperature control and lowers energy costs. Built for durability and reliability, the A952V is part of the trusted Trane family, offering quiet, consistent performance for residential temperature. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a perform setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: High Efficiency: 95% AFUE rating for energy savings and lower utility bills. Variable-Speed Blower: Adjusts airflow for better comfort and efficiency. Two-Stage Heating: Provides consistent warmth while optimizing energy use. Durable Construction: Made with quality materials for reliable performance. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A952V furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking comfort and efficiency. When paired with a compatible RunTru or Trane cooling system, it forms a complete HVAC solution for year-round climate control and reliable performance.   Furnace Model A952V100CU5SBA Capacity (BTU) 100K Stages Two-Stage Cabinet Size C AFUE 96% Configuration Upflow/ Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and expert support,

Read more less

What's Included: The RunTru A952V furnace offered by Cedar Park Heat and Air delivers advanced heating with energy efficiency and comfort. Featuring a variable-speed blower and a 95% AFUE rating, it provides precise temperature control and lowers energy costs. Built for durability and reliability, the A952V is part of the trusted Trane family, offering quiet, consistent residential heating. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Mounting of new equipment and all included components Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: High Efficiency: 95% AFUE rating for energy savings and lower utility bills. Variable-Speed Blower: Adjusts airflow for better comfort and efficiency. Two-Stage Heating: Provides consistent warmth while optimizing energy use. Robust Construction: Built with quality materials for reliable performance. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A952V furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking comfort and efficiency. When paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC solution for year-round climate control and reliability.   Furnace Model A952V060BU4SBA Capacity (BTU) 60K Stages Two-Stage Cabinet Size B AFUE 96% Configuration Upflow/ Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With a wide selection of trusted brands and expert

Read more less

What's Included: The RunTru A952V furnace offered by Cedar Park Heat and Air delivers advanced heating with energy efficiency and comfort. Featuring a variable-speed blower and a 95% AFUE rating, it provides precise temperature control and lowers energy costs. Built for durability and reliability, the A952V is part of the trusted Trane family, offering quiet, consistent residential heating. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: High Efficiency: 95% AFUE rating for energy savings and lower utility bills. Variable-Speed Blower: Adjusts airflow for improved comfort and efficiency. Two-Stage Heating: Provides steady warmth while optimizing energy use. Durable Construction: Made with quality materials for reliable performance. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A952V furnace offered by Cedar Park Heat and Air is ideal for homeowners seeking comfort and efficiency. When paired with a compatible RunTru or Trane cooling system, it creates a complete HVAC solution for year-round climate control and consistent operation.   Furnace Model A952V040BU3SBA Capacity (BTU) 40K Stages Two-Stage Cabinet Size B AFUE 96% Configuration Upflow/ Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heat, cooling, and ventilation systems. With a wide selection of trusted brands and expert support

Read more less

What's Included: The Trane S8V2 furnace offered by Cedar Park Heat and Air delivers high-efficiency heating with advanced comfort features, making it ideal for residential use. With an 80% AFUE rating, it provides reliable warmth while optimizing energy use. Its variable-speed blower and two-stage heating ensure precise temperature control, quieter operation, and better indoor air quality. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency Provides dependable heating with energy-conscious performance. Two-Stage Heating Adjusts heat output for improved well-being, efficiency, and consistent warmth. Variable-Speed Blower Enhances airflow control, reduces temperature swings, and boosts system performance. Durable & Reliable Design Made with premium materials for long-lasting operation and low maintenance. Versatile Installation Fits various home layouts and HVAC setups. The Trane S8V2 furnace offered by Cedar Park Heat and Air is a solid choice for homeowners seeking comfort, efficiency, and quiet operation. Paired with a Trane cooling equipment, it offers year-round climate control with optimized performance.   Furnace Model S8V2A040M3PCBA Capacity (BTU) 40K Stages Variable-Speed Cabinet Size A AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1 furnace offered by Cedar Park Heat and Air delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide consistent well-being and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating while managing energy costs. Single-Stage Heating: Ensures consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better comfort and system integration. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Fits various installation spaces. The Trane S8X1 furnace offered by Cedar Park Heat and Air is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort.   Furnace Model S8X1D120M5PSCC Capacity (BTU) 120K Stages Single-Stage Cabinet Size D AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace Electricity GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local    

Read more less

What's Included: The Trane S8X2 furnace offered by Cedar Park Heat and Air provides reliable, efficient heating for residential use. With an 80% AFUE rating, it balances energy savings and consistent warmth. Its two-stage heating and multi-speed blower improve comfort and temperature control for steady indoor climate management. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency Delivers cost-effective heating with energy savings. Two-Stage Heating Adjusts heat output for better comfort, efficiency, and quieter running. Multi-Speed Blower Improves airflow and system compatibility for balanced indoor air. Durable Construction Built with quality materials for long-lasting performance and low maintenance. Flexible Installation Fits various dwelling layouts and HVAC setups. The Trane S8X2 furnace offered by Cedar Park Heat and Air is a reliable choice for homeowners seeking efficiency and comfort. Paired with a Trane cooling system, it offers comprehensive year-round climate control.   Furnace Model S8X2A040M3PSCA Capacity (BTU) 40K Stages Two-Stage Cabinet Size A AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Pieces, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local <

Read more less

What's Included: The Lennox ML196UH furnace from Cedar Park Heat and Air offers high-efficiency heating with a 96% AFUE rating, ideal for homeowners seeking comfort and energy savings. This durable single-stage gas furnace delivers consistent warmth while reducing heating costs. With efficient operation and solid build, the ML196UH provides reliable home heating backed by Lennox s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finalize setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our setup causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Maximizes fuel use, reducing energy waste and lowering utility bills. Single-Stage Operation: Provides steady, reliable heating for reliable comfort. SureLight® Ignition System: Ensures dependable startup and long-lasting durability. Fully Insulated Steel Cabinet: Enhances efficiency and reduces noise for quiet operation. Flexible Installation Options: Compatible with direct and non-direct venting for versatile setup. The Lennox ML196UH furnace from Cedar Park Heat and Air is an electricity-efficient, cost-effective, and reliable heating solution. Pair it with a Lennox cooling unit for year-round home comfort and efficiency.   Furnace Model ML196UH090XE48C Capacity (BTU) 88K Stages Single-Stage Cabinet Size C AFUE 96% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers are responsible for ensuring compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance with applicable regulations. If unsure, consult your local regulatory authority before buying.

Read more less

What's Included: The Lennox ML180UHV furnace offered by Cedar Park Heat and Air delivers reliable heating with advanced features for energy efficiency and comfort. With an 80% AFUE rating and variable-speed blower motor, it provides consistent warmth and improved airflow, ideal for homeowners seeking dependable performance and better comfort control. Built with Lennox s quality standards, this furnace ensures lasting reliability and cost-effective operation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, installation, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating while managing energy use for affordable comfort. Variable-Speed Blower: Improves airflow and temperature control, optimizing well-being and reducing energy use. Durable Steel Cabinet: Built to resist wear, ensuring long-lasting performance and less maintenance. Quiet Operation: Runs smoothly and quietly for a peaceful indoor environment. Enhanced Air Quality: Supports better filtration and humidity control when used with Lennox air purification systems. The Lennox ML180UHV furnace offered by Cedar Park Heat and Air is a consistent, efficient heating solution. Pair it with a Lennox air conditioner or heat pump for a complete HVAC system designed for year-round comfort and performance.   Furnace Model ML180UH070V36B Capacity (BTU) 66K Stages Single-Stage Variable Speed Cabinet Size B AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers are responsible for ensuring compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance. If unsure, consult your local regulatory authority before buying.  

Read more less

What's Included: The Lennox ML180UH furnace offered by Cedar Park Heat and Air delivers stable heating and energy efficiency at an affordable price, ideal for residential use. With an 80% AFUE rating and durable design, it provides consistent comfort while controlling heating costs. Built for durability and simplicity, this furnace is a solid choice for homeowners seeking dependable performance from Lennox. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (regular thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and supply a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating with energy-conscious operation for cost-effective comfort. Single-Stage Operation: Ensures reliable, consistent heating output. Durable Steel Cabinet: Offers long-lasting performance with wear resistance and low maintenance. Flexible Installation Options: Compact design fits various spaces and layouts. Quiet Operation: Minimizes noise for a comfortable home environment. The Lennox ML180UH furnace offered by Cedar Park Heat and Air is a practical, dependable, and energy-optimized heating solution. Pair it with a Lennox cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model ML180UH090E60C Capacity (BTU) 88K Stages Single-Stage Cabinet Size C AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers are responsible for ensuring compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance with applicable regulations. If unsure, consult your local regulatory authority before buying.  

Read more less

What's Included: The Lennox ML180UH furnace offered by Cedar Park Heat and Air delivers reliable heating and energy efficiency at an affordable price, ideal for residential use. With an 80% AFUE rating and durable design, it provides consistent comfort while controlling heating costs. Built for durability and simplicity, this furnace is a solid choice for homeowners seeking dependable performance from Lennox. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, exchange, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line deployment Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will examine on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating with energy-conscious operation for cost-effective comfort. Single-Stage Execution: Ensures reliable, consistent heating output. Durable Steel Cabinet: Offers long-lasting performance with wear resistance and low maintenance. Flexible Installation Options: Compact design fits various spaces and layouts. Quiet Operation: Minimizes noise for a comfortable home environment. The Lennox ML180UH furnace offered by Cedar Park Heat and Air is a practical, dependable, and energy-efficient heating solution. Pair it with a Lennox cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model ML180UH045E36A Capacity (BTU) 44K Stages Single-Stage Cabinet Size A AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers are responsible for ensuring compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance. If unsure, consult your local regulatory authority before buying.  

Read more less

What's Included: The Lennox ML196UH furnace from Cedar Park Heat and Air offers high-efficiency heat with a 96% AFUE rating, ideal for homeowners seeking comfort and energy savings. This durable single-stage gas furnace provides consistent warmth while reducing heating costs. With efficient execution and solid construction, the ML196UH delivers trustworthy home heating backed by Lennox s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Fitting of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard deployment scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Maximizes fuel use, reducing energy waste and lowering utility bills. Single-Stage Operation: Provides steady, reliable heating for consistent comfort. SureLight® Ignition System: Ensures dependable startup and long-lasting durability. Fully Insulated Steel Cabinet: Enhances efficiency and minimizes noise for quiet operation. Flexible Installation Options: Compatible with direct and non-direct venting for versatile setup. The Lennox ML196UH furnace from Cedar Park Heat and Air is an energy-efficient, cost-effective, and reliable heating solution. Pair it with a Lennox cooling unit for year-round home comfort and efficiency.   Furnace Model ML196UH070XE36B Capacity (BTU) 66K Stages Single-Stage Cabinet Size B AFUE 96% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance with applicable regulations. If unsure, consult your local regulatory authority before buying.

Read more less

What's Included: The Lennox ML180UHV furnace offered by Cedar Park Heat and Air delivers trustworthy heating with advanced features for energy efficiency and comfort. With an 80% AFUE rating and a variable-speed blower motor, it provides consistent warmth and improved airflow, ideal for homeowners seeking dependable performance and better comfort control. Built with Lennox s quality standards, this furnace ensures lasting reliability and cost-effective operation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your house, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating while managing energy use for affordable comfort. Variable-Speed Blower: Improves airflow and temperature control, enhancing comfort and reducing energy use. Durable Steel Cabinet: Built to resist wear, ensuring long-lasting performance and less maintenance. Quiet Operation: Runs smoothly and quietly for a peaceful indoor environment. Enhanced Air Quality: Supports better filtration and humidity control when used with Lennox air purification systems. The Lennox ML180UHV furnace offered by Cedar Park Heat and Air is a dependable, efficient heating solution. Pair it with a Lennox air conditioner or heat pump for a complete HVAC system designed for year-round comfort and performance.   Furnace Model ML180UH090V48B Capacity (BTU) 88K Stages Single-Stage Variable Speed Cabinet Size B AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance. If unsure, consult your local regulatory authority before buying.  

Read more less